Re: [ic] Re: Dead 5.2 in RPC?

[Ron Phipps <suppressed>]

Bob Puff wrote:
> > > Hi Ron,
> > >
> > > Will that fix the authorizenet problems?  I'm a little gun-shy, after 
> > > having
> > > to do like 20 refunds due to this bug.  Thanks!
> > >
> > > Bob
> > >
> > > P.S. I am running Perl 5.8.4, non-threaded
> >
> > Hello Bob,
> >
> > I can't guarantee it will fix the problem, but your symptoms all sound 
> > like things I have ran into in the past (if you search the archives 
> > you'll find a lot of info about "double triple charges with signio" 
> > and the fix was to run in RPC mode with MaxServers 0.  Recently I was 
> > instructed to setup all sites at End Point with MaxServers 0 in high 
> > traffic mode to get the stability of high traffic mode with the fix 
> > for perl signaling problems that cause issues when calling sendmail or 
> > external programs.
> >
> > There was also a thread about authorizenet issues awhile ago and I 
> > think the solution may have been to use another method to contact 
> > authorizenet (using wget instead of lwp).
> >
> > --
> > Ron Phipps
> > End Point Corporation
> > suppressed
>
> Hi Ron,
>
> I thought the thing that fixed the perl signal problems was the RPC 
> mode, not necessarily the MaxServers thing.  Has the high traffic 
> setting been working ok for you?
>
> I did a search in the archives on authorizenet and wget, and came up 
> with nothing.  Any other suggestions for info on this?
>
> Bob

Hi Bob,

It's definitely MaxServers 0 that gets around the signaling issue when calling external programs.  High traffic with MaxServers 0 is working wonderfully for us.  It's used at FrozenCPU.com, Backcountry.com, Reliabemedical.com, any of the sites maintained by End Point are using that setup.saz

Here's a link to the commit about using wget:

http://www.icdevgroup.org/pipermail/interchange-cvs/2005-May/006341.html

I'm not sure where the main thread is about this problem, but it's in the archives.  Here is another post about the matter:

http://www.icdevgroup.org/pipermail/interchange-users/2005-June/043376.html

You may try searching for wget and Payment.pm or wget and Payment and see what turns up.

--
Ron Phipps
End Point Corporation
suppressed
_______________________________________________
interchange-users mailing list
suppressed
http://www.icdevgroup.org/mailman/listinfo/interchange-users